|
|
 |
| > Monitor
Audio > Gold Signature |
| |
|
GS10 |
|
The
GS10 re-writes the book on compact monitor performance, easily
eclipsing the dazzling
standard set by its predecessor, the GR10. It may be small, but
the GS10 showcases the multiple talents that make Gold Signature
series so remarkable. With its advanced, low-resonance drivers,
rigid build and contoured cabinet edges, the GS10 redefines accurate,
low-colouration sound in a compact, stylish stand-mount speaker.
Using the new, low distortion 6 1/2 inch RST® 2 bass-mid
driver and gold C-CAM® tweeter developed especially for the
GS series, the GS10 is capable of true 3-D imaging and tonal
accuracy. |
|
| |
|
GS20 |
|
The massively accomplished
GR20 was a hard act to follow, but its successor, the GS20, pulls
decisively ahead in all respects, combining gorgeous aesthetics,
sublime sonics and superlative build quality. Its two-and-a-half
way, three-driver configuration is built around a unique dual-cavity
cabinet design, in which the 61/2-inch RST® 2 bass and bass-mid
drivers work into separate enclosures, tuned to different frequencies
and impedances. This provides improved power handling and delivers
faster, deeper, more dynamic bass and greater transparency through
the crucial mid-range. Above that, the gold C-CAM® tweeter
ensures a smooth, detailed sound all the way up to 43 kHz, exploiting
the full potential of the latest wide-bandwidth digital formats. |
|
| |
|
GS60 |
|
The elegantly proportioned
GS60 embodies all the conviction and integrity of Monitor Audio
design. Its thirty year heritage is eloquently expressed by a
compelling unity of cutting-edge innovation and aesthetic creativity
bringing life-like power, dynamics and realism to music and film.
Like all models in the Gold Signature range, the flagship GS60
is a monument to the cabinet-maker’s art. Immaculate real
wood or piano gloss finishes are blended with a slender, contemporary
design and superb attention to detail, investing the GS60 with
an air of resolute quality. |
|
| |
|
GSFX |
|
The GS FX is a completely
new design from Monitor Audio. Its advanced dual mode configuration
can be switched automatically by a processor to accommodate a
range of surround sound applications. The speaker’s slim-profiled
angled baffle design incorporates no fewer than three driver
pairs. When used in monopole mode to reproduce discrete side
or rear channels, its front-firing 6 1/2 -inch RST® 2 bass/mid
driver and gold C-CAM® tweeter come into play, delivering
an accurate wide bandwidth sound-field to complement perfectly
a front-channel GS speaker combination. The GS FX in dipole mode
uses two side-firing pairings of 4-inch C-CAM® bass/mid driver
and gold C-CAM® tweeter combined with the tailored output
from the front-firing bass/mid driver to provide wonderfully
diffused yet tonally precise surround effects. |
|
| |
|
GSLCR |
|
Amazing as it may seem, a
centre speaker may be required to reproduce over 60% of the entire
output of a film soundtrack. This means that it must deliver
the dramatic impact of explosions and sound effects as precisely
as it recreates the many tonal subtleties of dialogue. The outstanding
dynamic reach and generous power handling of the Gold Signature
LCR speaker allow it to master the most dynamic drive conditions
with ease and still have something in reserve. Monitor Audio
has optimised the design to provide accuracy and control over
a wide listening area while preserving the exact tonal signature
and balance of the GS Series. This means that the GS LCR will
integrate perfectly with any of the speakers in the Gold Signature
range. |
|
| |
|
GSW12 |
|
The
new GSW-12 sub-woofer is bristling with features packed into
a compact high power enclosure.
A new 1000 watt Class D power amplifier is coupled to a new ultra-long
throw 12² C-CAM® driver, equipped with a massive 4² voice
coil and a substantial (18kg) double stack motor system. Inputs/outputs
include a balanced XLR input, LFE input (RCA), L/R stereo inputs
(RCA), L/R link Inputs (RCA) and a link output (RCA Slave). All
inputs and outputs can be configured via the top-mounted control
panel or remote to operate as direct links or have programmable
filter settings. The control panel features a push/turn rotary
encoder operation with variable phase, volume, low pass filter
(independent input / output programmable), four EQ settings and
input mode selection. Twelve-volt trigger, 9Pin D-connectors
and an optional RF eye are provided for system control after
custom installation. The GSW-12 is available in piano black finish
or beautiful real wood veneers to match the GS range. |
|
| |
|
